Schoeps style transformerless circuit

5 responses

  1. Pablo Rodriguez Reyes | Reply

    Hi Jon, i have a few questions
    What are the symbols of a circle with a cross in the center?
    What about the 12v conection? Where i get that voltage from? Phantom power?
    What is the OSC?

    Thanks

    1. The circles with an x in the center are pads on the PCB. The “12v connection” is a voltage reference. The two 12 volts references are a connected in the ciruit but it keeps me from having to draw a line all over the schematic. Phantom power is delivered via the LXR connections, so it’s not shown on the schematic. OSC is the power connection to the oscillator PCB and has a matching pad on that circuit board.

      1. Pablo Rodriguez Reyes

        Ohhhh okay, thanks, i have to more questions, what about r4 and r5 values?, what is the hole in the XLR1 that have a G? Ground? And the one beat de Bias potentiometer?

      2. R4 and R5 are for a low-pass filter (per the notes on the schematic. They depend entirely on whether you want them at all and what your needs are. G is ground.

  2. Hi Jon, D1 and D2 are zener Diods right? which is the zener tension (Vz), the hole that is below the 1M potentiometer, what is it for?

Leave a Reply to Pablo Rodriguez Reyes Cancel reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s